![]() To cancel, long press PLAN for 5 seconds and then press CLEAN to confirm cancelling. In scheduling mode, press PLAN to exchange hour and minute, press HOME to increase number and press SPOT to decrease number.Turn ON power switch and press PLAN to enter scheduling mode.Press PLAN and then use directional buttons to set the schedule.Power on the robot and point the remote towards the robot.All the scheduling will be automatically cancelled if the power switch turns off. For example, if you set 6:30, robot will start to clean after 6 hours and 30 minutes from now on, and will clean everyday at this time. You can schedule to let the robot starts cleaning from a certain time. Keep pressing CLEAN on main body for 3 seconds. Robot will automatically enter sleeping mode if no command received after 15 seconds.ī. To turn the robot into sleeping mode from selected mode:Ī. NOTE: When robot is paused, press CLEAN to make the robot to re-start cleaning. To exchange robot from cleaning mode to selected mode: Then press CLEAN for a second time, the robot will start cleaning automatically. NOTE: If robot is in sleeping mode, press CLEAN button to wake the robot up from sleeping mode. Press CLEAN button on main body or on remote control to start cleaning. Robot is not working, no display on display panel and power switch is on Selected mode: Robot is not working, “88:88” on display panel is flashing Cleaning mode: Robot is working, display panel will show different status.ī. The robot will automatically return to charging dock when battery is low. If the robot will not be used for a long time, turn the power switch off, fully charge the robot and store it in a cool dry place. In normal use, always store the robot on charging dock with base plugged in.Ĭ. When fully charged, display panel will turn solid. Before first use, charge the robot overnight. Press HOME to make the robot return to charging dock to charge itself.Ī. Charge the robot in either way as shown below:ī. If power switch is turned off, all the scheduling will be lost.ĬAUTION: Before charging the robot, please make sure the power switch is turned ON or else the robot cannot be charged.ģ. Please always keep the power switch on.ī. (If no command received, the robot will activate sleep mode after 15 sec.)Ī. Turn on the Power Switch around the power socket, then display panel will flash. NOTE: Put charging dock against the wall and remove obstacles about 1 meter at both sides and about 2 meters forward.Ģ. Place in charging dock, plug in adapter, signal light on charging dock will flash. Remote Control Operating Product Operating 1. When the robot is working or under operation, display panel will show the current status as below: NOTE: This product could not be used by children, mentally challenged people or people lack of related experience and knowledge (unless there’s people instruct or supervise them). The product must be disconnected from the supply mains when removing the battery.The battery must be removed from the product before it is scrapped.Do not place this product on a high-temperature environment. Use this product in temperature from -10☌ to 40☌.The product may not be able to pass through steps over 10mm.To avoid tipping, inform all the people in the house when this product is working.Before use, check whether adapter and outlet are properly connected.Turn off the power switch when you don’t need to use this product for a long time.Do not place this product where it is easy to drop off (tables, chairs, etc.).Before use, collect the floor environment (remove all the fragile objects and cords, clothing’s papers and drapes.Do not use this product in wet or moist environment (any environment with liquid).Do not sit on top of this product or attach an object on top of it.Do not over-bend the power cord or pressure the power cord with heavy or sharp objects.If the product requires cleaning, clean it after being fully charged.Do not make this product close to cigarette, lighter, match or any flammables.Do not make clothes or part of a body drawn into the product’s wheels.Do not touch the power cord, plug or adapter when your hands are wet.Using other unmatched adapter may cause electric shock, fire or product damage. Only use the adapter provided by the factory.Users are not allowed to disassemble or repair the product. Only the certified technician may disassemble the product.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |